DB2020/PDA Logs for SE Tool contains 30 logs
- 1 log for unlock DB2020
For all operation you must have Internet connection & SeTool Box.
Supported phones:
K800, V630, K610, K320, K790
Z610, Z710
W710, W850, W950, W958
M600 , M608
P990
Infromation about logs used for certain operations:
- flashing DB2020 platform - K800 K610 .... (1 credit/phone)
- unlock DB 2020 platform - K800 K610 .... (1 credit/phone)
- unlock PDA and K320 (5 credits/phone)
How unlock DB2020 looks like - instruction:
NOTE: Before you will process to unlock make sure that you got good and stable Internet connection. Loses of logs due transmission errors of TCP/IP, wrong setup will be not refundable. We dont get any responsibility if you loose credit due to any error. We dont refund for this service please take note of it before purchase. Any claims can be made to author via forum link http://www.mobile-files.com/forum/forumdisplay.php?f=93
1) Remove all usb devices from computer, connect just SeTool 3 Box
2) Connect powered OFF phone with DCU-60 USB cable
3) Turn on the phone, instal drivers (even if it was installed previously) - after this you can disconnect phone and power it OFF for now
4) Run leatest version of SeTool software
5) In Setting choose interface as USB (unlock can be done only by DCU-60 cable)
6) Choose model as K610 or any other from DB2020 platform
7) In "Settings" mark "use server for csca unlock/flash" and "do full unlock instead of usercode reset for DB2020"
8) Fll out access server information - login and password recived from us, server IP address are 195.91.135.198
9) IN SEMC tab click Unlock and connect powered OFF phone with pushed "C" on keyboard
10) Wait for signature calculation - it can takes about 2 minutes. If calculation will be not done credits will be not taken from your account, if yes signature will be saved in backup\%imei%
11) You will get communicate that you must discconect phone and power it ON - after this phone will got 4 closed locks
12) Connect phone to computer but now without pressed "C" - power it ON (system can request drivers if you not correctly install it before) - if you will fail this you will lost credits, please make then sure that all it's properlly instaled.
13) Click "Test Point OK" - phone will be powered OFF and it's unlocked.
It`s important to do everything carefully - server is working very stable. There is no possibility of connection problem it`s always online.
For Payment by Credit Card/MoneyBookers
After sucesfully and positive verification of your order you will recive access to special registration form, once filled it up you will recive login and pass to your e-mail.
For Payment by T/T Bank transfer
Once money wil be collected at our account you will recive access to special registration form, once filled it up you will recive login and pass to your e-mail.
Package contains:
- Login and pass for SeTool 30 with logs
- Instruction
- Invoice
|
Home 
Phone Service Devices 
